• <xmp id="ikm6i"><table id="ikm6i"></table>
    <bdo id="ikm6i"><center id="ikm6i"></center></bdo>
    Chinese English

    Contact Us Now! foreign_trade@0086pv.com

    PTFE lined with double pipe fire retarding breather valve

    PTFE lined with double pipe fire retarding breather valve

    Product Category:BREATHER VALVE
    Product Name:PTFE lined with double pipe fire retarding breather valve
    Product Tag:PTFE lined with double pipe fire retarding breathe
    Update Date:2021/8/31 0:04:24

    Note: Our Products Can Be Customized According To Customers' Needs. In Addition To National Standards,We Can Design And Manufacture According To American Standards, Japanese Standards, German Standards, Russian Standards, British Standards And So On.

    1. Product introduction of fluorine-lined breather valve

    According to the standard "Code for Fire Protection Design of Petrochemical Enterprises" (GB50160-90), "Fixed roof tanks for Class A and Class B liquids should be equipped with flame arresters and breather valves." It can be seen that the breather valve and flame arrestor are indispensable facilities for the storage tank. It can not only maintain the pressure balance of the storage tank, ensure that the storage tank is not damaged under overpressure or vacuum, but also reduce the volatilization and loss of the medium in the tank. The breather valve is Energy-saving products that maintain the air pressure balance of the storage tank and reduce the volatilization of the medium are often used in conjunction with flame arresters.

    The fire-resistance breather valve produced by our company has the characteristics of compact structure, large ventilation, small leakage, corrosion resistance, and good sealing performance. Recently, a high-level fluorine-lined breather valve (type HXF-IZ) and flame arrester have been developed. It is located at the suction port of the breather valve to prevent fire sources from entering the breather valve housing. It has the advantages of small size, light weight, convenient maintenance, cleaning, and replacement.

    2. Technical parameters of fluorine-lined breather valve

    1. Operating pressure of breather valve:

    Type A: 355Pa (36mmH2O), -295Pa (-30mmH2O)

    Type B: 980Pa (100mmH2O), -295 Pa (-30mmH2O)

    Type C: 1750Pa (180mmH2O), -295 Pa (-30mmH2O)

    Type D: Special pressure, user specified.

    2. Material of fire barrier: stainless steel 316/Hastelloy.

    3. Explosion-proof level: BS 5501; IIB, IIC.

    4. Flange standards: GB, HG, SH, HGJ, JB, ANSL, JIS and other standards. (Specified by the user, please indicate the pressure level)

    5. Manufacturing and testing standards: Manufacture and acceptance according to (petroleum storage tank breathing valve) SY7511-87, (petroleum storage tank flame arrestor fire resistance performance and test methods) GB5908-86 and other standards: or user-specified standards.

    Note: The above product pictures and dimensions are for reference only. If you need accurate drawings, please contact us.

    3. Maintenance of fluorine-lined breather valve

    1. After the breather valve products are delivered to the construction site, if they are not installed temporarily or the factory will be overhauled or overhauled in the future, they should be stored in a warehouse with rainproof facilities: the breather valve series products must not be inverted during transportation.

    2. The breather valve series products should be checked on the tank top once a month to check whether there is dust or dirt in the valve disc, valve seat, valve stem, valve sleeve, etc. If there is, clean it up: give the valve sleeve and valve every six months. Wipe the rod again with transformer oil.

    3. Check the fire barrier of the breather valve of the flame arrester once every six months. If stains or impurities are found to block the fire barrier, remove the fire barrier, use the corresponding solvent to clear the stain, and then clean the fire barrier with water Clean, put it in the shell after ventilating and drying.

    Four, fluorine-lined breather valve ordering instructions

    Please specify the size, operating pressure and material of the fluorine-lined breather valve when ordering. When other standard flanges, materials or operating pressures are required, please specify when ordering.


    Product Keyword Tags>>

    Breather valve,Breather valve Manufacturer,Breather Valve Manufacturers in china


    ? Copyright 2002 - 2021 | Shanghai Wuyue Pump & Valve Group Co., Ltd. | All Rights Reserved Sitemap ICP:09023850-8 Design By CNPV
  • <xmp id="ikm6i"><table id="ikm6i"></table>
    <bdo id="ikm6i"><center id="ikm6i"></center></bdo>